Leeze
CC 60 PRO R
CC 60 PRO R
Standard / Shimano / Black
Leeze Bike Store
Hohenholter Straße 25
Leeze GmbH
48329 Havixbeck
Germany
CeramicSpeed will be ready for shipment starting in week 19
Select options
CeramicSpeed will be ready for shipment starting in week 19
CeramicSpeed will be ready for shipment starting in week 19
Keep up the pace. Then pick it up.
The CC 60 PRO R is your race upgrade for sustained high speeds, long leads, and aerodynamic efficiency. Designed for segments and races where aerodynamics make all the difference—when the pace stays consistently high and every watt saved counts.
With its 60 mm D2R Aero Carbon rim, the CC 60 PRO R maximizes the aerodynamic efficiency of your race bike and delivers noticeably higher speeds. At the same time, handling remains precise and controllable—even in changing wind conditions. Straight-line stability, crosswind stability, and direct power transfer are the result of a Leeze D2R design consistently optimized for race speed.
Technically, the CC 60 PRO R features a 23 mm hooked rim width with a 31 mm outer width—optimally matched to modern road tires starting at 28 mm. 18 SAPIM CX carbon spokes reduce air resistance and rotating mass while maintaining high lateral stiffness. Combined with the new Leeze PRO hub, this creates an uncompromising aero race wheelset with a total weight of just 1,260 grams.
Optimal aero performance setup with 28 mm / 30 mm tires
The best performance-comfort setup with 32 mm tires.
Tire widths ranging from 28 to 45 mm can be used.
| Weight1 | 1260 g (±5%) | |
| Wheel material | Carbon | |
| Wheel type | 23-622 with hook | |
| Braking system | Centerlock disc brake | |
| Rim height | 60 mm | |
| Wheel width | 31 mm | |
| jaw width | 23 mm | |
| Logos | white or black, painted | |
| Tire type | Folding/clinchers, tubeless-ready | |
| Tire widths | 28–50 mm | |
| Hub | Leeze PRO VR & HR | |
| freewheel | Shimano 10-/11-/12-speed / SRAM 10-/11-speed, SRAM XDR 12-/13-speed, Shimano Micro Spline; conversion to Campagnolo and Campagnolo N3W possible | |
| Axle standard | 12 mm thru-axle (12x100 mm, 12x142 mm) | |
| Number of spokes | 18/18 | |
| Spokes VR | Sapim CX-Carbon, 2-cross / Sapim CX-Carbon, radial | |
| Spokes HR | Sapim CX-Carbon, 2-cross / Sapim CX-Carbon, radial | |
| Weight limit | 120 kg system weight |
- Wheel set
- Valve stickers to prevent valve rattling (2 pcs.)
- 2x tubeless rim tape (already installed)
- 2 LEEZE PRO Tubeless Valves
Available to match your wheelset: tubeless valves, tire sets, brake rotors, and cassettes.
Leeze GmbH
Hohenholter Straße 25
48329 Havixbeck
Germany
info@leeze.de
Manufacturer's part number: LRS-20617-01
Here you'll find detailed instructions on how to use and maintain your wheelset:
Please observe the following safety instructions to ensure your safety and the longevity of your wheels. The accompanying or online user manual is an integral part of the product and must be read in its entirety before use.
Do not exceed the specified maximum total weight (rider + bicycle + luggage). Exceeding this limit can lead to equipment failure and cause a fall resulting in serious injury.
Do not exceed the specified maximum tire pressure. Always consider the combination of tire, rim, and setup (reduced maximum pressures, especially for tubeless and hookless setups). If the wheel and tire have different maximum values, the lower value always applies as the valid maximum. Excessive pressure can cause tire blowouts, leading directly to crashes and severe injuries.
Only use tire types and sizes approved in the datasheet (especially for tubeless and hookless setups). Incorrect combinations can lead to tire defects or tire blow-off, directly causing crashes and severe injuries.
The assembly, disassembly, and maintenance of safety-critical components (e.g., spokes, hub bearings, tubeless setup, brake rotors, thru-axles, cassette) must only be performed by qualified specialist personnel. Improper execution can lead to material failure and serious accidents.
Always tighten thru-axles, cassettes, and brake rotors with a torque wrench, observing the torque values specified by the respective manufacturer. Grease the freehub body before installing the cassette to prevent cogging of the sprockets. When mounting or dismounting tires, use only plastic tire levers as a last resort; never use metal levers or other hard objects to avoid damage to the rim and tire.
Only use the wheelset for its intended purposes (e.g., road bike or gravel), see link: Leeze Application Areas. Use the wheelset only with disc brakes. Do not expose the wheels to high temperatures (e.g., in a car in the sun or leaning against a radiator). Not suitable for downhill, BMX, jumps, cargo transport, or other extreme forms of use.
Regularly check your wheels for cracks, delamination, and damage to spoke holes, brake track, or rim bed. For optimal spoke tension and trueness, we recommend wheel checks every 5,000–10,000 km, every 12–24 months, or after 6 months of inactivity. If damage is suspected, stop riding immediately and contact Leeze service. In case of doubt, discontinue use immediately and consult the manufacturer or a specialist dealer.
Clean rims, spokes, and hubs regularly with mild soap and water; avoid high-pressure cleaners and direct water jets on bearings. Store wheels dry and dry them after wet rides. For extended periods of inactivity (>6 months), we recommend a bearing and wheel check. Clean and grease the freehub system regularly. For tubeless systems, replace sealant and rim tape at least twice a year to prevent damage to spoke nipples. Negligence in maintenance can lead to premature wear, malfunctions, or sudden failure during a ride, thus posing a safety risk.
Stop riding immediately and have the wheels professionally inspected, even for minor or invisible damage. Invisible cracks in the carbon can lead to sudden breakage and a crash.
Uncompromising racing technology.
SAPIM CX Carbon
30% LIGHTER. 80% STIFFER.
Leeze PRO Hubs
293 grams PER SET.
D2R PRO Carbon Rims
60 grams lighter.
Optimized for 28 mm tires.
D2R Aerodynamics & Rolling Resistance
The 60 mm D2R PRO rim has an outer width of 31 mm and is designed for a measured tire width of approximately 29 to 29.5 mm. This measurement is typically achieved with modern 28 mm tires on a 23 mm rim width.
01 — Deeper rim. Maximum
D2R aerodynamics.
02 — Wider rim width. Optimized for 28–30 mm tires.
03 — Wider outer rim. Modern aerodynamic profile.
04 — Optimized tire fit. Noticeably better control.
05 — Modified hook.
Secure tire fit.
Carbon spoke technology.
SAPIM CX Carbon
The SAPIM CX-Carbon is the logical evolution of modern aero spokes.
Maximum stiffness, high tensile strength, and consistent durability in racing conditions.
Mechanical Performance.
Leeze PRO Hub
293 g per set.
High flange stiffness.
Fully compatible with freehubs in the Leeze ecosystem.
The PRO hub was specifically designed for use with Sapim CX-Carbon T-Head headsets.
Race Ready Performance.
Leeze lives and breathes cycling
The starting point for every development project is the Leeze Factory Racing Team's requirements.
ThePRO Seriesreplaces the EVO WASO Series, which was introduced in 2018.
It is the result of consistent optimization, based on thousands of test kilometers in actual racing conditions.
